Products
-
On saleVisit product page →Look no further than the Ronix Parks Wakeboard Bindings to bring out the best in your new deck. Your deck will thank you for the baseless construction that minimizes weight while keeping board control at a maximum. Ronix also threw in Rad Foam around the heel for double up support and an Intuition+ Liner for customized foot support. Enduro Leather makes this boot four times stronger against abrasion and shoelace friction than traditional boot materials. Parks is all packaged together with Eco Innovation to eliminate environmentally harmful PVC Solvents. Bring the best out of your deck, experience zero-gravity comfort, and work towards a cleaner environment with the Ronix Parks Wakeboard Bindings. *Only compatible with Brainframe M6 Hardware.*
PRODUCT DETAILS
FLEX
Articulating Cuff – The boot flexes with the rider without boot distortion
FIT
Footbed Feel #3
Feetbelts – Retain ankle and heel with a conforming independent wrap
Double Stuff Footbeds – Self-aligns to your natural foot canting
LINER & LACING
Intuition + – The most intelligent custom liners in the world come coupled with Ronix's boots. The + formula was developed with Intuition to offer the renowned custom fit with more cush and less pack out. The original heat formed custom fit, unique to your feet.
Asymmetrical firm density liner blends delivers most responsive board feel
BASEPLATE
Brainframe Technologies – A footwear breakthrough in fit, function and interchangeability.
Baseless Hardware – Break out your rubber mallets to indulge in these soothing sounds minus the base. Ronix's original low profile design delivers superior board control on an ultra-lightweight foundation - often imitated never duplicated. *Only compatible with Ronix Brainframe M6 Hardware.*
ADDITIONAL FEATURES
Rad Foam – Built into the heel area for those big landings
Stitched reinforcing in the heel area eliminates delamination
Enduro Leather – Built to withstand the test of time, this new material is 4 times more abrasion resistant than traditional materials. Applied on the tongue to prevent the laces from cutting and long term wear and tear.
Eco Innovation – Ronix eliminated the use of PVC solvents which are potentially hazardous to the surroundings and human health. Instead, Ronix uses more costly, higher quality materials that are more sustainable and easier on the environment.
-
On saleVisit product page →We made the Aspect so you wouldn't have to sacrifice fun while skiing at slower speeds. The same high-end features of the V are set on a wider frame for performance at 28 to 32 mph. Sharp bevels on a wide fore-body set the ski higher in the water adding support on aggressive turns. V-Tech is our step base technology that regulates the flow of water along the base of the ski, adding maneuverability while reducing drag. Six V-shaped steps run through the tunnel of the ski increasing efficient water flow from your front bindings to the fin. You don't have to work as hard to enjoy the fast, responsive performance of the Aspect.
Features
- SUGGESTED SPEED
- 26 - 32 mph.
- CONSTRUCTION
- C.A.P.T. (Connelly Advanced Profile Technology)
- Fiberglass wrap
- V-Tech (Step Base Technology)
- Closed cell polyurethane resin core
- Polished speed base
- SIZES
- 65''/165 cm - Up to 180 lbs.
- FIN
- Aluminum drop through fin
-
On saleVisit product page →The GT is designed to give you more contact through the sections of the ski that control your movement. Rounded bevels in the tail combined with a short sidewall set you slightly deeper in the water, allowing you remarkable speed into the buoy without risk of blowing out the tail. V-Tech specifically designed for 36 mph speeds add a curve to the steps on the base of the ski to increase water flow efficiency through the middle of the tunnel while maintaining grip on the edge. More speed into the buoy and out of the turn gets you across the wake and to the next ball earlier than ever before.
Features
- SUGGESTED SPEED
- 32 - 36 mph.
- CONSTRUCTION
- Made in the USA
- Low density, super-light CNC cut PVC core
- C.A.P.T. (Connelly Advanced Profile Technology)
- 90% carbon layup outlasts 100% carbon skis
- V-Tech (Step Base Technology)
- Hybrid base - polished tip, micro textured tail
- Lifetime Warranty
- SIZES
- 68''/173 cm - Over 180 lbs.
- FACTORY FIN SETTINGS
- Length - 6.860
- Depth - 2.495
- DFT - .770
-
On saleVisit product page →The Women's Aspect skis unbelievably well at 28 to 32 mph without sacrificing any of that high performance feel you expect from a ski with V-Tech. The same high-end features of the V are set on a slightly wider frame. Sharp bevels on a wide fore body set the ski higher in the water adding support on aggressive turns. The fiberglass layup is designed to address the agility of a lady, with a softer, more forgiving ride. V-Tech is our step base technology that regulates the flow of water along the base of the ski, adding maneuverability while reducing drag. Six V-shaped steps run through the tunnel of the ski increasing efficient water flow from your front bindings to the fin.
Features
- SUGGESTED SPEED
- 26 - 32 mph.
- CONSTRUCTION
- C.A.P.T. (Connelly Advanced Profile Technology)
- Fiberglass wrap tuned for women
- V-Tech (Step Base Technology)
- Closed cell polyurethane resin core
- Polished speed base
- SIZES
- 67''/170 cm - Over 140lbs
- FIN
- Aluminum drop through fin
-
On saleVisit product page →The Angel's continuous rocker creates a smooth pop and landings, perfect for the female rider looking to progress her riding.
The sky is the limits when riding on the Liquid Force Angel wakeboard. The continuous rocker creates a smooth ride on the water and predictable pop off the wake. The DISC hull helps to generate more board speed, allowing the board to plane while at slower speeds.The Angel is a smooth, stable ride that will be a hit among ladies that are looking to progress their riding this summer.
-
The 100% newly designed WATSON COMP vest is a high tech “tour de force” designed for one of the most demanding pro riders. We’ve loaded this vest with many of our most advanced features… 4XS Stretchable foam, Chill stopper lining and the V-Flex Shoulder pattern. The vest is super easy to get on and has a bit more impact protection than in its had. Our WATSON COMP sets the standard for lightweight comfort and performance.Visit product page →*This vest is a competition vest and is not Coast Guard Approved
-
Visit product page →Thin, lightweight and quick drying competition vest. Made of high quality materials.
-Zip Up Style
-Available in green
-NON COAST GUARD APPROVED COMPETITION VEST
Shoulders Chest Weight Size 47 cm 98 cm 72 kgs M 49.5 cm 103 cm 80 kgs L 52 cm 108 cm 88 kgs XL 54.5 cm 115 cm 95 kgs XXL *These vest tend to run a little large, also all neoprene will stretch 10% when wet.
-
Visit product page →WHAT YOU’LL FEEL: One of the most difficult parts about learning to efficiently turn a ski is understanding how to roll the ski’s edge into higher angle. The higher the edge angle, the easier and quicker the ski will turn. With Butterknife, the sidecut and surface area were formed for stability and an easier roll into a higher edge. Turns are automatic and buoyancy is at a maximum with the largest surface area in its class. Effortless ups, light line tension and low spray. The easiest ski you’ve ever ridden. Now with All Terrain Core and a 100% carbon build!
KEY FEATURES: • All-Terrain Core • 100% Carbon Laminates • Recommended max speed 30mph • RST (Radiused Stability Turn) Tail Shape • Bent Vee fin
-
On saleVisit product page →Specs
- Ability Level:Intermediate-Advanced
- Riding Style:Park
- Rocker Type:Three-Stage
- Core Material:Fiberglass, Foam
- Base Type:Standard Base
- Wakeboard Mount Pattern:M6
- Fins:4
- Athletes:Danny Harf
- Warranty:1 Year
- Previous
- Page 1 of 83
- Next