Arrow Fat Left Icon Arrow Fat Right Icon Arrow Right Icon Cart Icon Close Circle Icon Expand Arrows Icon Facebook Icon Instagram Icon Hamburger Icon Information Icon Down Arrow Icon Mail Icon Mini Cart Icon Person Icon Ruler Icon Search Icon Shirt Icon Triangle Icon Bag Icon Play Video

Regulators

Ocean Sports carries a wide selection of the industry's BEST regulators in stock and by order.  Choose from Aqua Lung, Apeks, Mares, Atomic, ScubaPro, and Zeagle.
  • Aqua Lung Legend LX Supreme

    Aqua Lung

    Aqua Lung Legend LX Supreme

    $999.99

    v

    Aqua Lung

    Aqua Lung Legend LX Supreme

    $999.99

    The Legend LX Supreme is specially adjusted to resist freezing with the same high performance features and ease of breathing as the Legend LUX but without the pink gold finish. The Legend LX Supreme is equipped with an over-sized lipshield on the second stage to keep lips warm and like the Legend LUX, features the Master Breathing System (MBS).

    First Stage:

    • Auto Closure Device (ACD) - keeps corrosive water out of the first stage inlet by automatically closing as the Legend is removed from the cylinder valve
      • This prevents internal lubrication from washing away
      • Safer for elevated percentages of oxygen
    • Unique over-balanced, diaphragm design results in superior performance at depth
    • 2 HP ports and 4 MP ports are angled for optimum hose routing
    • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out
    • Available in your choice of yoke or DIN connectors
    • Compatible with up to 40% O2 right out of the box

    Second Stage:

    • Master Breathing System (MBS) - The MBS is a new, simple and effective way to adjust the breathing performance of your Legend LUX. The MBS controls two functions at one time. It controls the direction of air, which alters the venturi effect, as well as changes the opening effort. One control – two functions, it doesn’t get easier.
    • Pneumatically-balanced second stage results in smooth, easy breathing
    • The Comfo-Bite™ mouthpiece virtually eliminates jaw-fatigue
    • Heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water
    • The ergonomic exhaust tee channels the exhaust bubbles out of your field of vision. The design also contributes to a reduction in exhalation effort
    • Attached to a 29” braided Aqua Flex hose. These hoses are lightweight and extremely pliable which eliminates any tugging on the mouthpiece
    Visit product page
  • Aqua Lung Core Supreme

    Aqua Lung

    Aqua Lung Core Supreme

    $599.99

    v

    Aqua Lung

    Aqua Lung Core Supreme

    $599.99

    The CORE regulator’s amazing breathing, which is rated as “superior” on the ANSTI breathing machine, coupled with its generous features, at an attractive mid-range price, provides the best value of any regulator offered today. The CORE comes standard with Aqua Lung’s unique, patented, auto-closure device (ACD) which seals water out.

    Features:

    • Auto Closure Device (ACD) - keeps corrosive water out of the first stage inlet by automatically closing as the CORE is removed from the cylinder valve
      • This prevents internal lubrication from washing away
      • Safer for elevated percentages of oxygen
    • The balanced diaphragm first stage provides superior, consistent performance
    • The pneumatically-balanced second stage results in smooth, easy breathing
    • The T-shape of the first stage optimizes the location of the 4 MP ports and 2 HP ports
    • Uses parts that are common to other Aqua Lung models for easier servicing
    • The easy-to-grip venturi lever prevents unwanted freeflow at the surface while giving a performance boost at depth
    • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water
    • Compatible with EAN 40 new, out of the box
    • Equipped with Aqua Lung’s patented Comfo-bite™ mouthpiece along with a reusable mouthpiece clamp
    Visit product page
  • Aqua Lung Titan Regulator

    Aqua Lung

    Aqua Lung Titan Regulator

    $469.99

    v

    Aqua Lung

    Aqua Lung Titan Regulator

    $469.99

    Incorporating all the best features of its predecessors, this third generation Titan has innovative features resulting in a more comfortable, lighter-weight and easier-breathing regulator. For the consumer that wants performance at an affordable price to the dive center that wants a rugged and easy to maintain regulator, the Titan delivers.

    Features:

    First Stage:

    • Uses a balanced-diaphragm mechanism resulting in ease-of-breathing and consistent performance while environmentally protecting the internal parts
    • The first stage is T-shaped as opposed to its in-line predecessor making it more compact and providing optimal hose routings
    • Features 2 HP ports and 4 MP ports
    • The unique, forged body of the first stage uses less brass making it more compact and lighter weight
    • The outer skin provides impact protection as well as a cosmetic flair
    • Uses a conical filter for better filtration
    • Accepts an optional ACD (auto-closure device) system
    • Improved yoke screw eliminates trapped water
    • Compatible with EAN 40 new, out of the box

    Second Stage:

    • Mid-size, high performance demand valve second stage
    • Easy-to-grip venturi knob stops unwanted freeflow when the regulator is out of your mouth
    • Can easily be reversed from right-handed to left-handed configuration by an authorized Aqua Lung dealer without additional parts (QD Version only)
    • Comes with Aqua Lung’s Comfo-Bite™ mouthpiece which reduces jaw fatigue
    • A grid built into the exhaust tee creates finer exhaust bubbles for less noise and more stability
    • Easy purge front cover
    • A reinforced polycarbonate material makes this second stage stronger than its predecessor
    • The side openings on the front cover prevent freeflow when facing into currents or riding a scooter
    • This quick-connect model allows the 2nd stage to be removed and reattached without tools. This allows quick change-outs in the field and locker.
    Visit product page
  • Apeks AT20 / US4

    Apeks

    Apeks AT20 / US4

    $399.99

    v

    Apeks

    Apeks AT20 / US4

    $399.99

    The AT20 is the predecessor to the XTX20. We brought it back to the Apeks line up because it represents an excellent value. This is an ideal entry-level regulator that can spoil divers in a hurry.

    This high-performance regulator boasts an balanced first stage coupled with a pneumatically balanced second stage.

    The smooth, quiet breath is sure to enhance your diving enjoyment.

    Designed for water temps above 50°F / 10°C

    The Comfo-bite™ mouthpiece, with its patented bridge virtually eliminates jaw-fatigue.

    First Stage:

    • The first stage is a balanced diaphragm type that offers consistent performance from start of dive until end of dive, regardless of depth.
    • 1 HP port and 4 MP ports are available
    • Available in yoke only

    Second Stage:

    • Pneumatically-balanced second stage results in smooth, easy breathing
    • The large purge button on the AT20 is easy to operate even with thick gloves.
    • The integrated venturi control provides a performance boost at depth while preventing unwanted freeflow at the surface.
    • An extremely efficient exhaust valve improves the breathing performance of the regulator
    • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue
    • Offers a compact, integrated exhaust tee
    Visit product page
  • Apeks Sidemount Regulator Kit

    Apeks

    Apeks Sidemount Regulator Kit

    $1,799.99

    v

    Apeks

    Apeks Sidemount Regulator Kit

    $1,799.99

    As the popularity of sidemount diving continues to grow around the world, Apeks delivers a regulator kit that contains all of the necessary hardware and accessories to complete your breathing set-up, including two award-winning XTX50 regulators.

    Kit Contents

    • 2 ea. XTX50 DIN regulators with 5 port swivel turrets
      • One XTX50 has a 83” / 210cm hose
      • One XTX50 has a 24” / 60cm hose
    • 2 ea. custom length MP inflation hoses (one for buoyancy system, one for drysuit)
    • 2 ea. brass pressure gauges with 6 inch hoses (units in PSI)
    • 1 ea. 90° elbow fitting
    • 1 ea. bungee necklace
    • 1 ea. stainless steel clip
    • 2 sets of short exhaust ports
    • Regulator bag to hold all
    • Setup illustration, CD manual and quick start guide
    Visit product page
  • Apeks Tek 3 Regulator Set

    Apeks

    Apeks Tek 3 Regulator Set

    $1,799.99

    v

    Apeks

    Apeks Tek 3 Regulator Set

    $1,799.99

    Apeks has developed unique first stages specifically for use on a twinset. The benefits of this system are: minimized risk of accidental snagging, no hose kinking and easier access to the manifold valves. Each first stage has three medium pressure ports and one high pressure port. They are over-balanced, cold water compatible and extremely robust. Tek3 looks great too. Not only is the Tek3 suitable for twinset use but it is equally suitable for single cylinder or stage cylinder configurations offering perfect, snag-free hose positioning.

    The TEK3 utilises all of the proven technology contained within the Apeks range of first stageregulators .

    The ports on the TEK3 first stages are oriented so that all hoses will route downward to provide the streamlined configuration required by technical divers.

    Allows unrestricted accessibility to the cylinder valves when using a twin cylinder set up.

    Features an innovative Diver Changeable Exhaust system (DCE). The system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. The regulator is supplied with both sets of exhaust tees.

    The second stages can be converted from a right-handed hose configuration to a left-handed configuration. The process of changing the regulator to a left-handed configuration is both quick and simple. However this procedure must ONLY be performed by an APEKS Authorised Service Technician.

    Available with DIN connection only.

    Outstanding cold water performance (below 10 C / 50 F).

    First Stage:

    • Compact, solid one-piece body
    • Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
    • 1 HP port and 3 MP ports are all angled downward.
    • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.
    • Maximum working pressure is 300 BAR (4350 psi).

    Second Stage

    • Pneumatically-balanced second stage results in smooth, easy breathing.
    • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
    • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
    • Easy-to-grip opening effort control knob keeps the diver in control.
    • The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
    • A silicone exhaust valve improves the breathing performance of the regulator.
    • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.
    • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.
    Visit product page
  • Apeks XTX 200 Set

    Apeks

    Apeks XTX 200 Set

    $1,299.98

    v

    Apeks

    Apeks XTX 200 Set

    $1,299.98

    The XTX 200 is second only to the XTX Tungsten and quite rightly enjoys its position towards the top of the Apeks regulator range. The definitive blend of style and high performance, every detail on this product has been carefully designed to offer a regulator of the highest quality.

    Set includes:

    • 1st stage
    • 2nd stage
    • Egress Octo

    Features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. The regulator is supplied with both sets of exhaust tees.

    Can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However this procedure must ONLY be performed by an APEKS Authorised Service Technician.

    Available in yoke or DIN configuration.

    Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable.

    Suitable for coldwater use (below 10 C / 50 F).

    First Stage:

    • FSR style first stage.
    • Highly polished bright chrome plating.
    • Compact one piece body.
    • 4 angled medium pressure ports, 4 x 3/8” UNF.
    • 2 angled high pressure ports, 2 x 7/16” UNF.
    • Optional 5th port.
    • Removable ARCAP valve seat.
    • Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
    • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out
    Second Stage
    • Pneumatically-balanced second stage results in smooth, easy breathing.

    • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.

    • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.

    • Easy-to-grip opening effort control knob keeps the diver in control.

    • The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.

    • A silicone exhaust valve improves the breathing performance of the regulator.
    • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.
    • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.
    Visit product page
  • Apeks XTX 50

    Apeks

    Apeks XTX 50

    $899.99

    v

    Apeks

    Apeks XTX 50

    $899.99

    The XTX50 is for the discriminating diver who wants the benefits of a feature-rich regulator at a moderate price. This popular regulator has four medium-pressure ports all mounted on a rotating turret. This results in optimal hose routing while eliminating sharp bends in the hose.

    Features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. The regulator will be supplied with both sets of exhaust tees

    Optional 5th port is available for sidemount or twin cylinder set ups.

    Can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However this procedure MUST only be performed by an APEKS Authorized Service Technician.

    Available in yoke or din configuration

    Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable

    Suitable for coldwater use.

    First Stage:

    • Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
    • 2 HP ports and 4 MP ports are angled for optimum hose routing
    • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.

    Second Stage:

    • Pneumatically-balanced second stage results in smooth, easy breathing
    • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used. Press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc.
    • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
    • Easy-to-grip opening effort control knob keeps the diver in control
    • The 2nd stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
    • A silicone exhaust valve improves the breathing performance of the regulator
    • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue
    • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water
    Visit product page
  • Apeks XTX40/Din - Oxygen

    Apeks

    Apeks XTX40/Din - Oxygen

    $799.99

    v

    Apeks

    Apeks XTX40/Din - Oxygen

    $799.99

    XTX technology is also available in an oxygen model. This regulator is built for oxygen percentages between 0 – 100%. This compatibility coupled with its excellent reliability make it the choice for technical divers doing high O2 percentage deco stops.

    Do not attempt to use this product with enriched air until you have obtained training in nitrox use with mixtures containing over 40% O2 by volume, from a nationally recognized training agency.

    Green and yellow cosmetic pieces clearly identify that this regulator is dedicated for high-percentage oxygen use.

    The compact DS4 first stage has four medium-pressure ports and one high-pressure port (it does not feature the rotating turret found on the DST first stage).

    Features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. Only the narrow exhaust tee is supplied with the regulator.

    Can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician.

    A braided flexi-hose comes standard. These hoses are lighter weight, more flexible and more durable.

    Suitable for coldwater use (below 10 C / 50 F).

    This regulator is suitable for use with up to 100% oxygen.

    First Stage:

    • DS4 first stage.
    • Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
    • 2 HP ports and 4 MP ports are angled for optimum hose routing.
    • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.

    Second Stage

    • Pneumatically-balanced second stage results in smooth, easy breathing.
    • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
    • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
    • Easy-to-grip opening effort control knob keeps the diver in control.
    • The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
    • A silicone exhaust valve improves the breathing performance of the regulator.
    • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.
    • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water
    Visit product page
  • Page 1 of 6